04-02-2021



Memory Slots Used 2 Of 4Slots

Slots
This is the total number of memory upgrade slots (sockets) followed by their configuration. Banks are the way a system addresses memory. A bank must be completely filled with memory modules of the same size and type in order for the system to recognize and address the memory. i.e. :
3 (3 banks of 1) This indicates that there are 3 memory slots. These are divided into 3 banks, and each bank consists of one memory slot. So you can add memory one piece at a time for the system to use.

UsedMemory Slots Used 2 Of 4Memory

4 (2 banks of 2) This indicates that there are 4 memory slots. These are divided into 2 banks, and each bank consists of two memory slots. So you must add memory two pieces at a time (they must be the same size and type of memory) in order for the system to benefit from the upgrade.

Memory Slots Used 2 Of 45

There were risers in the 80s that could expand one slot into 2 or 4 slots, but there's no reason for this with modern PCs since 2gb (and even 4gb) dimms are available. Are there any 2 gig ddr2 dual. Check to make sure your memory is oriented the right direction. Make sure if you have more than two slots the RAM is installed in slots of matching color – on a quad channel this is usually 1 & 3 or 2 & 4. If there is only one memory card and it is in the top slot, remove the top memory card before installing RAM in the bottom slot. In Windows 10, on the performance tab, under memory in task manager, it says 'Slots used: 1 of 2' I was wondering if this is reliable. Searching my laptop online suggests that it only has one slot. As in the thread title, if i was too install 2 x 2gb sticks in the 2 and 4 slots on my motherboard would the results be the same as if i used 1 and 3. Motherboard is a Gigabyte GA-EP45-DQ6. Memory slots 1 and 3 are Yellow and 2 and 4 are red. In the manual it says it can handle dual channel in both sets.

Laptop Memory Slots Used 2 Of 4

12 (3 banks of 4) This indicates that there are 12 memory slots. These are divided into 3 banks, and each bank consists of four memory slots. So you must add memory four pieces at a time (and they must be the same size and type of memory) in order for the system to benefit from the upgrade.